Vezco VZ-IP-INTPRO, Быстрый старт

Страница: 15 / 35

Video Intercom Door Station · Quick Start Guide
8
Terminal S1 is set as default for connecting exit button.
2.2.4 External Card Reader Wiring

Please set the DIP switch first before connecting the card reader.


If the DIP switch should be configured when the card reader is power-on, please
reboot the card reader after configuring the DIP switch.


The DIP switch description is shown in the following table:

No. Description How to Configure
1-4
Set the RS-485 address
ON: 1
OFF: 0
6
Select Wiegand protocol
or RS-485 protocol
ON: Wiegand
OFF: RS-485
7 Set the Wiegand protocol
(It is invalid when setting
OFF in 6.) ON: Wiegand 26
OFF: Wiegand 34
RS-485 Card Reader Wiring
Figure 2-5 RS-485 Card Reader Wiring