Network Bullet Camera
·
Quick Start Guide
17
Figure 2-7 Combine Junction Box’s Cover with its Body
8.
Repeat steps 5 to 7 of
to complete the
installation.
2.3
Installation of Water-proof Jacket
Purpose:
It is recommended to adopt the water-proof jacket (supplied) for the
network interface when the camera is installed outdoor.
Steps:
1.
If the network cable has been settled down, cut off the plug of the
network cable first.
2.
Route the network cable through the following components in
sequence: fix nut, water-proof ring, and the main body of the
water-proof jacket, as shown in the figure below.
3.
Insert the water-proof ring into the main body of the water-proof
jacket, to increase the sealing ability of the components.
Содержание VZ-IP-B4530
Страница 1: ...NETWORK BULLET CAMERA Quick Start Guide...
Страница 35: ......
