Hybrid Network Digital Video Recorder (HVR) User Manual
- 35 -
Chapter 4 Network Operation Guide
4.1 WEB browser operation guide
4.1.1 Internet connection
Verify that the network digital video recorder is properly connected to the network;
there is no rout in the network, please assign the IP address of the same network segment. If
there is a rout in the network, you need to set the corresponding gateway and subnet mask. About
the network setting of digital video recorder,
please consult “network setting”
Make sure the IP address is set correctly. After the IP address is set, you can use the
system's own ping tool to check whether the network digital video recorder is properly connected
to the network.
4.1.2 Control installation and user logout
After the network digital video recorders connected to the network, you can log on through
the IE browser to access network digital video recorders;
You can download and install IE plug-in from the network and NVR, after installation , run
the plug-in, and then in the IE browser, entering the network digital video recorder IP
address, user name, password, the connection successfully and then will pop up the
following interface:
