Hybrid Network Digital Video Recorder (HVR) User Manual
- 10 -
Chapter 3 Local Operation Guide
3.1 Start Up and Shutdown
3.1.1 Start Up
Plug in the power cable, press the start up button, power indicator light on, video recorder
powering up. After starting up, default video outputting mode as multi-screen output, if powering
time is in the preset video recording time, the system will automatically start the timing recording
function.
Notice: Please use the power/adapter supplied with the network digital video recorder. Do not
use other types or brands of power supply instead of the original power adapter.
3.1.2 Shutdown
*To shutdown the device, long press the start up button at the front panel
*Go to
【
Right-click menu
】
→
【
Shut down system
】
, select
【
shutdown
】
. (Hint: It is
recommended to use this method when shutting down to avoid damage to equipment and hard
disk when accidental power off).
Note: Before replacing the hard disk, make sure the device has been shut done.
3.1.3 Power Off Recovery
When the video recorder is recording, if the system power is cut off or forced to shut down,
you can turn on the DVR, then it will automatically save the video before powering off, and
automatically resume to the status before the powering off.
3.2 Login System
After normal start up, click the right mouse button to select the main menu will pop up the user
login interface, please enter the correct user name and password to log into the system (default
user name: admin password: 123456).
3.3 Menu Operation
After the user successfully login, follow the menu bar on the interface for the relevant settings:
3.3.1 Sign out
Click on the [Close System] icon on the menu, the interface will be shown on the right:
Cancellation" button to log out of the current user;
