26
27
Transducers and Accessories
TB0044
- 19° Transom Mount High Speed
Transducer. Comes with the Mounting Bracket
and 25 Feet of Cable.
TK184
- Complete Mounting Kit. Comes with
TB0084 Transducer, FL Power Cord, Unit Mounting Bracket, and all the
Hardware You Need to do the Job Right.
TB0084
- 12° Transom Mount High Speed Transducer. Comes with the
Mounting Bracket and 25 Feet of Cable.
TB0030
- 9° Transom Mount High Speed Transducer. Comes with the
Mounting Bracket and 25 Feet of Cable.
TB0045
- Dual Beam 9/19° Transom Mount High Speed Transducer.
Comes with the Mounting Bracket and 25 Feet of Cable. Built-In
Switch Box must be Mounted within 3 Feet of the Depth Finder.
BK0044
- Optional Suction Cup Mount for all of the above High Speed
Transducers. Dual suction cups for extra holding
power.
TB0023
- 19° Puck Transducer. For Mounting on a
Electric Trolling Motor, In-Hull Mounting,
Portable Use, or Ice Fishing. Comes with 25 Feet
of Cable87
TK123
- Complete Mounting Kit. Comes with TB0087 Transducer, FL
Power Cord, Unit Mounting Bracket, and all the Hardware You Need
to do the Job Right.
BK0023
- Optional Suction Cup Mount for TB0023.
TB0027
- 9° Puck Transducer. For Mounting on a Electric Trolling
Motor, In-Hull Mounting, Portable Use, or Ice Fishing. Comes with 25
Feet of Cable.
TB0087
- 12° Puck Transducer. For Mounting on a Electric Trolling
Motor, In-Hull Mounting, Portable Use, or Ice Fishing. Comes with 25
Feet of Cable.
TB0032
- Dual Beam 9/19° Puck Transducer. For Mounting on a
Electric Trolling Motor, In-Hull Mounting, Portable Use, or Ice Fishing.
Comes with 25 Feet of Cable. Built-In Switch Box must be Mounted
within 3 Feet of the Depth Finder.
TB0050
- 19° Ice-Ducer. Self Leveling and Floats in
the Ice Hole. Comes with Float, Stopper, and 7 Feet
of Specially Designed Cable.
TB0051
- 9° Ice-Ducer. Self Leveling and Floats in
the Ice Hole. Comes with Float, Stopper, and 7 Feet
of Specially Designed Cable.
TB0052
- Dual Beam 9/19° Ice-Ducer. Self Leveling and Floats in the
Ice Hole. Comes with Float, Stopper, and 7 Feet of Specially Designed
Cable. Built-In Switch Box must be Mounted within 3 Feet of the
Depth Finder.
TB0080
- 12° Ice-Ducer. Self Leveling and Floats in the Ice Hole. Comes
with Float, Stopper, and 7 Feet of Specially Designed Cable.
"S" CABLE
- The S-Cable (short for Suppression Cable) is used to
reduce the output power of the FL-8 or FL-8SE. This can often help
clear up readings in shallow or cluttered waters. Simple installation
between the unit and transducer.
SB-100 Switch Box
- The SB-100 Switch Box allows you to run two
transducers on one FL-8 or FL-8SE unit. You could switch between a
trolling motor mounted transducer and a stern mounted one or, while
ice fishing, switch between the hole you are fishing from and a remote
hole. Also, the
SB-200
is available as a switch box for two units and
one transducer.
