VEVOR YMK40107A, Руководство по эксплуатации

Страница: 5 / 8

04
• Open the package, take out the machine (the whole machine extension
head and host machine), extract the head, and take out the inner parts of
the tank. If it is a glass bottle, assemble the handle of the cup and make
sure the handle is firmly assembled.
• Add the water with the maximum scale water level into the tank of the
main engine (do not exceed the water level).
• Place the machine head on the main machine (check whether the
sealing ring of the machine head is properly installed or leaking), insert
the connecting power plug (product plug) of the machine head into the
socket of the machine head, and insert the power cord plug (product
plug) into the power socket of the machine head.
• After confirming that the plug is correctly connected and firmly
inserted, insert the host power plug into the wall socket.
• Turn on the on / off switch of the host, then press the start button,
the start button indicator lights up, the head fan starts to rotate, and the
host enters the heating state.(when it is used for the first time, turn on
the on / off switch and the indicator light is on.)
• When the main engine is heated for about 30 minutes, the distilled
water begins to drip out of the outlet slowly until the water in the inner
tank is completely dried and protected by automatic tempera ture
control, and the ON/OFF switch should be closed.
Use Instructions
Function Description
3. Temperature control:
The temperature can be set, with a minimum of 30 ℃ and a maximum of
108 ℃.When the machine is heated to the set temperature, the machine
enters the thermal insulation state and the head is cooled normally.The
control time and temperature can work at the same time, the setting time
can determine the required time, and the temperature can also be set to
the required temperature. For example, when the time is set to 02:10 (2
hours and 10 minutes), and the temperature is set to 83℃, the machine
1. Three screen display:
Time display, current temperature display and set temperature display.
2. Timing function:
The maximum time setting is 99 hours and 59 minutes, and the minimum
time setting is 1 minute.Set any time within the range. After setting, stop
for 3 seconds then enter the working state. The clock enters the
countdown. When the time reaches 00:00, the machine stops working
and enters the standby state.When time setting is required, press the set
key, the clock minute bit light flashes, press the "+" and "-" keys for
minute bit setting, press the set key again, the clock minute ten bit light
flashes, press the "+" and "-" keys for setting, press the set key again to
enter the clock setting, the clock light flashes, and press the "+" and "-"
keys for setting, After setting, stop setting. After 3 seconds, the machine
works normally and the clock enters the countdown.