VEVOR GY-120, Инструкции

Страница: 5 / 5

Fault Analysis and Treatment
Cases Cause of issue
Check the
contents
Approach
After pressed the
start button, the
machine did not
work
Power problems Check the power Replacing the
power outlet
Plug and socket
connection is bad
Check the plug is
loose or not
Replace the plug
wire or socket
After pressed the
start button, the
timer lights but the
machine did not
work
The wiring was
loose inside the
machine
Open the
machine rear
plate to check the
wiring.
Reconnect the
loose wire
The belts was loose
Open the machine
rear plate to
check die wiring.
Tighten the belt or
replace the belt
After pressed the
start button, the
machine work but
can not stop
working.
The Timer is bad Timer Replace the Timer
Machine working
noise
Machine was put
instability
Check whether
the table and the
machine is flat
Replace the table
Shrapnel loose
Shrapnel should
be in close contact
with the cup
Adjust the
shrapnel
Cup was thrown
off
Shrapnel loose
Check the
shrapnel.
Tighten or
replace the
shrapnel