Vetus EP2200K, Руководство по эксплуатации

Страница: 34 / 84

Checking the V-belt
Inspect the V-belt for wear, and tear (fray-
ing and cracking). Replace a V-belt that is
in poor condition.
Check, tension or replace the V-belt only
when the motor is stopped. Do not forget
to refit the V-belt guard, where present.
Checking tension
Check the V-belt tension by moving it with
thumb and index finger. If you can move it
more than 3 mm (
1
⁄
8
”), with about 1 kg (2
lbf) pressure, it must be re-tensioned.
Tensioning drive belt
To do this, loosen the bolts which secure
the water pump support to the motor one
full turn. Now push the water pump (sup-
port) outwards until the V-belt has the nec-
essary tension.
Re-tighten both fitting bolts.
32
Maintenance Checking the V-belt
Every 100 operating hours, at least once every year.
VD00165 VD00166
17
VD00034
5