Vetus-Maxwell RC12-HD, Руководство пользователя

Страница: 6 / 31

4 www.maxwellmarine.com
2.0 INSTALLATION
2.1 SELECTION OF POSITION FOR THE WINDLASS
Identify any bulkheads, wiring or piping under the deck that should be avoided.
Position the windlass so the rope/chain falls directly into the rope/chain locker with at least
200mm (8”)
unobstructed fall from the lowest part of the windlass.
Ensure the rope/chain does not foul on the windlass motor
“UP” is the clockwise rotation when looking down on the windlass.
The windlass must be positioned to allow the rope/chain to have a clear run from the bow roller (B) to the
chainwheel without deflection.
The deck plate should be mounted pointing in the direction of the incoming rope/chain. This arrangement allows
the rope/chain to have maximum engagement with the chainwheel.
The deck plate should be mounted so that the chain leads into the chainwheel parallel to the deckplate base this
will ensure the chain feeds into the chainwheel correctly. A plinth may be necessary to raise the deckplate to the
correct height, it is also acceptable to angle the deck plate mounting so that the deckplate is parallel to chain line.
A minimum distance of 150mm (6”) is recommended between the bow roller and the windlass.