Vetter ManuTel SlimLine Скачать руководство пользователя

Страница: 14 / 43

2.7

Personnel requirements

2.7.1

Qualification

WARNING!
Risk of injury if personnel are not sufficiently qualified!

If unqualified personnel perform work on the Manu

Tel

Slim

Line

or loiter

in the danger area of the Manu

Tel

Slim

Line

, dangers arise that could

cause serious injuries and significant property damage.

–

Have all tasks carried out by personnel qualified to do so without

exception.

–

Keep unqualified personnel away from the danger areas.

The following section of this manual stipulates qualifications for personnel in relation to

the various fields of activity:

Driver of industrial trucks

The driver of industrial trucks is capable of operating industrial trucks with a driver’s seat

or a driver’s platform thanks to their education, knowledge and experience. The driver of

industrial trucks is aware of the dangers involved with lifting and transportation tasks.

The driver of industrial trucks has proven their ability to drive industrial trucks with a driv-

er’s seat or a driver’s platform to the operator and has consequently been assigned con-

trol by the operator.

The driver of industrial trucks is familiar with the use of the Manu

Tel

Slim

Line

and the

associated dangers.

Service specialist

The service specialist has a qualification in mechatronics or similar or has verifiably taken

part in training in which the necessary knowledge and procedures for safe performance of
assembly, installation, start-up and service on the Manu

Tel

Slim

Line

has been taught.

The service specialist is familiar with the use of the VETTER Manu

Tel

Slim

Line

and the

associated dangers.

The service specialist is capable of operating industrial trucks with a driver’s seat or a

driver’s platform thanks to their education, knowledge and experience. The service spe-

cialist is aware of the dangers involved with lifting and transportation tasks.

Only persons of whom it can be expected that the will carry out their duties reliably are

permitted as personnel. Persons whose ability to react is affected, for example, by drugs,

alcohol or medicine are not permitted.

When selecting personnel, note the age and occupation-specific regulations applicable at

the operation site.

Safety

Personnel requirements > Qualification

V1.09/2019

ManuTel

telescopic fork arm Type SlimLine

Содержание ManuTel SlimLine












































Результаты поиска

Содержание ManuTel SlimLine

Отзывы:

Похожие инструкции для ManuTel SlimLine

Бренды по названию

Популярные бренды

Vetter ManuTel SlimLine, Руководство по эксплуатации

Результаты поиска

Содержание ManuTel SlimLine

Отзывы:

Похожие инструкции для ManuTel SlimLine

Бренды по названию

Популярные бренды