Vetter DuoLoc Скачать руководство пользователя

Страница: 8 / 56

Safety

2.1

Symbols in this manual

Safety instructions in this manual are marked by symbols. The safety instructions are

introduced by signal words which express the extent of the danger.

DANGER indicates a hazardous situation which, if not avoided, will result in

death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

NOTICE indicates a situation which, if not avoided, could result in material

damage.

This symbol highlights useful tips and recommendations as well as information for effi-

cient and fault-free operation.

Safety instructions may relate to certain, individual instructions for action. Such safety

instructions are embedded in the instruction for action so that the user can continue

reading the text when performing the action. The signal words listed above are used.

Example:

Open the locking device of the folding

fork arms

WARNING! Risk of hands and other body parts being crushed when

moving!

Grip the folding

fork arms

at the head and fork blade and carefully move it to the

side on the fork carrier with appropriate force.

Close the locking device of the folding

fork arms

Scope of application!

All of the following safety information applies to all variants of the folding fork

arms.

Safety instructions

DANGER

WARNING

CAUTION

NOTICE

Tips and recommen-

dations

Safety instructions

in instructions for

action.

NOTICE

Safety

Symbols in this manual

V1.07/2021

Folding fork armsTypes KGA, KGI, and DuoLoc

Содержание DuoLoc

























































Результаты поиска

Содержание DuoLoc

Отзывы:

Похожие инструкции для DuoLoc

Бренды по названию

Популярные бренды

Vetter DuoLoc, Руководство по эксплуатации

Результаты поиска

Содержание DuoLoc

Отзывы:

Похожие инструкции для DuoLoc

Бренды по названию

Популярные бренды