13
4
Connecting snap of door
stop strap
Snap the door stop strap
into position as shown.
Locking cam adjustment
When locking the door, there
should be a moderate amount
of resistance to key movement.
Too much or too little resis-
tance indicates a need for lock-
ing cam adjustment. This is
done by removing the cam,
clamping it in a vise, and
tapping it firmly with a ham-
mer in the appropriate direc-
tion to increase or decrease
resistance. Generally, a 10-15
degree bend is sufficient.
Extended use may also
necessitate an adjustment,
in which case, the above
procedure also applies.
1
Objective
Once all of the Floating Mount
Saddle Bag Hardware is
attached to the motorcycle
and the doors and trim are
mounted on the saddle bags,
the saddle bags are ready to be
mounted on the motorcycle.
Mounting the saddle bag at
its forward mount
Starting at the forward mount
insert the mounting stud into
the stud funnel while holding
the bag out at an angle as
shown.
Saddle Bag Mounting
