Vetta V100, Руководство пользователя

Страница: 23 / 44

Step 1:
Step 2:
To set a service interval (in hours only)
scroll to the number you want to set
using Button #2 and select it by
pressing Button #1.
Note:
The Service
Timer sets and displays whole hours
only. It does not display minutes.
Proceed until all the digits for the
service interval have been selected,
then press Button #1 again. (1999
hours = maximum)
The Service Timers, one for each bike, may be
programmed with a select number of ride time
hours as the interval for servicing the bicycle or
any component on it, such as a front or rear
shock. Accumulated Ride Time is displayed on
the upper line and the Service Time interval is
set and displayed on the lower line. In the
Service Timer mode, the hour digits appear on
the lower level with the right hand digit
flashing.
Note:
The default setting for the
Service Timer is "0000" hours, which means the
Service Timer is turned off.
SERVICE TIMER NOTES
Accumulated Ride Time (upper line) operates in conjunction
with the other timers and starts as soon as the wheel turns. It
stops automatically when the computer receives no input from
the wheel for 3 seconds.
The Service Timer screen can be viewed in both the Setup
mode and in the System Check screen sequence. Access Setup
through the SPD/DST screen mode by pressing Buttons #1 and
#2 simultaneously for 2 seconds with RT/TT timers off.
•
•
SETUP: SERVICE TIMER