VETRON 5064, Руководство по обслуживанию

Страница: 38 / 95

36
02/2021
VETRON 5064 Welding Machine
DISPLAY STEP DESCRIPTION
» INTERVAL WELDING PROGRAMS
1
P 2 2 W 4 1 3 3 1 5
P M O N R M R G A A E
» Change program number
In order to only show programs suitable for the
selected technology, you can set filters by using
the technology buttons
2 »
Set the
INTERVAL PROGRAMS
filter.
3
P 2 2 W 4 1 3 3 1 5
P M O N R M R G A A E
» Select requested program.
After 5 seconds without input, the display auto-
matically returns to the previous program
4 » Confirm
5a
P 3 2 4
P MM O N R M R G A A E
Machine is ready for operation.
If the installed wheel does NOT match the wheel stored in the program,
the machine requests a WHEEL CHANGE .
5B
Y
W
C
S
E
A ?
N
L
G
E
H
H
/
E
N
O
E
YES »
Confirm
If you confirm with YES , the machine travels
into the wheel change position and the wheel
change should be performed (chapter 04.09.)
NO
» Mark NO
» Confirm
If you do not want to perform a wheel change, the
currently used wheel is shown on the display.
PREREQUISITE:
The wheel matches the technology of the program.
6
P 3 2 4
P MM O N R M R G A A E
Machine ready for operation
ADVICE:
If your access rights level is 1, you can overwrite
the wheel stored in the program with the currently
used wheel by pressing on the “Save” button.
7 Press pedal.
As soon as you press the pedal forward and
start welding, the display is switched. Instead
of the wheel number, the distance still to be
traveled of the current work step (here: N01) is
shown (in live mode).
If the first work step is finished, the display
automatically switches to the next step.
P 3 3 1 m 2 4 4 2 m
P A O E 0 R M G N N 1
P 3 0 m 2 4 0 3 m
P A O E 0 R M G N N 2
04. COMMISSIONING & WELDING
12. INTERVAL WELDING PROGRAMS
–1-2