VETRON 5064, Руководство по обслуживанию

Страница: 37 / 95

35
02/2021
VETRON 5064 Welding Machine
DISPLAY STEP DESCRIPTION
» CONTINUOUS WELDING PROGRAMS
1
P 2 2 W 4 1 3 3 1 5
P M O N R M R G A A E
» Change program number
2 » Set the CONTINUOUS PROGRAMS filter
3
P 2 2 W 4 1 3 3 1 5
P M O N R M R G A A E
» Select requested program.
After 5 seconds without input, the display
automatically returns to the previous program
4 » Confirm
5A
P 3 2 4
P MM O N R M R G A A E
Machine is ready for operation.
If the installed wheel does NOT match the wheel stored in the program,
the machine requests a WHEEL CHANGE .
5B
Y
W
C
S
E
A ?
N
L
G
E
H
H
/
E
N
O
E
YES » Confirm
If you confirm with YES, the machine travels
into the wheel change position and the wheel
change should be performed (chapter 04.09.)
NO
» Mark NO
» Confirm
If you do not want to perform a wheel change,
the currently used wheel is shown on the display.
PREREQUISITE:
The wheel matches the technology of the program.
6
P 3 2 4
P MM O N R M R G A A E
Machine ready for operation.
ADVICE:
If your access rights level is 1, you can overwrite
the wheel stored in the program with the currently
used wheel by pressing on the “Save” button.
04. COMMISSIONING & WELDING
11. CONTINUOUS WELDING PROGRAMS