Vetek MO.DTR.526.R6, Руководство по эксплуатации

Страница: 14 / 21

DTR
Manuale Operativo - Operating Manual MO.DTR.526.R6
Pag. 13
PROTOCOLLO DI COMUNICAZIONE
COMMUNICATION PROTOCOL
Protocollo: 8 bit dato, 1 bit stop, NO parity.
Non usati CTS RTS DCD. Il dato è trasmesso in modo continuo.
Formato della stringa dati trasmessa:
STX n1 n2 n3 n4 n5 (caratteri ASCII codificati in esadecimale)
Protocol: 8 bit data, 1 bit stop, NO parity. Not used CTS RTS
DCD. The data is sent in continuous mode.
Format of the transmitted string data:
STX n1 n2 n3 n4 n5 (ASCII chars in hexadecimal code)
STX 0x ff (Start stringa) STX 0x ff (Start string)
n1 HSB - 0dddsxxx (byte n1 in codice binario) dove:
ddd = decimal point: 000 = xxxxx, 001 = xxxx.x,
0 = xxx.xx, 011 = xx.xxx, 100 = x.xxxx
s = segno(0,1); s = 0 positivo, s = 1 negativo
xxx = valore es.: 99999=0x 1 869f n1 =00000 001 = 0x 01
-99999=0x 1 869f n1 =0000 1001 = 0x 09
800.0=0x 0 1f40 n1 =0 001 0 000 = 0x 10
-80.00=0x 0 1f40 n1 =0 0101000 = 0x 28
n1 HSB - 0dddsxxx (byte n1 in binary code) where:
ddd = decimal point: 000 = xxxxx, 001 = xxxx.x,
010 = xxx.xx, 011 = xx.xxx, 100 = x.xxxx
s = sign(0,1); s = 0 positive, s = 1 negative
xxx = valore es.: 99999=0x 1 869f n1 =00000 001 = 0x 01
-99999=0x 1 869f n1 =0000 1001 = 0x 09
800.0=0x 0 1f40 n1 =0 001 0 000 = 0x 10
-80.00=0x 0 1f40 n1 =0 0101000 = 0x 28
n2 MSB1 - bit4÷7=0 es.: 99999=0x1 8 69f n2 =0x 08 n2 MSB1 - bit4÷7=0 es.: 99999=0x1 8 69f n2 =0x 08
n3 MSB2 - bit4÷7=0 es.: 10000=0x02 7 10 n3 =0x 07
n3 MSB2 - bit4÷7=0 es.: 10000=0x02 7 10 n3 =0x 07
n4 LSB1 - bit4÷7=0 es.: 5000=0x013 8 8 n4 =0x 08 n4 LSB1 - bit4÷7=0 es.: 5000=0x013 8 8 n4 =0x 08
n5 LSB2 - bit4÷7=0 es.: 2500=0x009c 4 n5 =0x 04 n5 LSB2 - bit4÷7=0 es.: 2500=0x009c 4 n5 =0x 04