Vetek Weighing AB
www.vetek.com
JWL Service Manual
May not be reproduced in any form without written permission
PAGE
26
select the parameter value, with
the printing modes including
/
/
.
(3). Follow Step (2) to select the
parameter item P02, with the
printing mode selected as
.
(4). Follow Step (2) to select the
parameter item P03, selecting the
Baud rate from
/
/
.
(5).When the setting is completed,
press
to store the setting
and return to the weighing mode.
■
Wire connecting the scale and the PC
How to use a PC to receive the weighing information?
(1) Use the connecting wire as shown in the following figure to connect the
scale and the PC.
(2) Set the printing mode as continuous.
(3) Now, the scale will output the data to the PC.
(Of course, you must have a receiving program at the PC end.)
