Vetek ERT DYNALINK, Техническое руководство

Страница: 5 / 5

Technical manual
Web www.vetek.se
Email info@vetek.se
[MODE]
〖
L0000
〗
press [ZERO] to adjust digit,
press [TARE]to move digit
[MODE]
〖
U AdJ
〗
Handle instrument DC voltage adjustment
[MODE]
〖
U X.XX
〗
press [ZERO] to adjust digit,
press [TARE]to move digit
[MODE]
〖
bAud4
〗
Bauds of wireless communication(for 433Mhz and
868MHz setting, bAud1: 1200bps,
bAud2:2400bps,bAud3:4800bps, bAud4:9600bps
[ENTER]
〖
0
〗
Save parameter value and return back to normal
communication status. if need to save parameter value
as company’s default setting
Just press [PEAK] and [ENTER]key 3 seconds
3
．
Recall handle instrument default value
If the handle instrument’s parameter were changed by wrong operation. User can recall company’s default value:
Switch off handle instrument, press [TARE] ,[ENTER] and [ON/OFF] key 3seconds,handle instrument will display L dFL and
automatic power OFF. Press [ON/OFF] key ,default value will be load into handle instrument.
4
．
Recall DYNALINK default value
If the DYNALINK’ s parameter were changed by wrong operation. User can recall company’s default value:
Switch off DYNALINK, then press[ZERO], [TARE] and [ON/OFF] key 3 seconds on DYNALINK overlay. The default value will
be load into DYNALINK