Technical manual
Press[MODE]
〖
dFULt
〗
Company default setting
[ENTER]
〖
S dFL
〗
Save default setting value
[MODE]
〖
dFULt
〗
After press [mode] key, DYNALINK save data and
return back to normal status
，
handle instrument return
back to menu status
Press[MODE]
to select
〖
ESC
〗
[ENTER]
〖
XXX
〗
handle instrument return back to normal
communication status
2
．
LOCAL Setting
After Remote setting ,if DYNALINK RF parameters are changed, the handle instrument will can not communicate with
DYNALINK, it must be set the parameters same as DYNALINK. setting method as following:
KEY
DISPLAY
ILLUSTRATION
[ZERO][TARE]
[ON/OFF]
〖
00000
〗
After display
〖
00000
〗
can release key
〖
88888
〗
Display Twice
〖
Ert
〗
Display Twice
〖
u 3.2
〗
Display Current handle instrument Software version
〖
U X.XX
〗
Display Current handle instrument voltage
〖
LOCAL
〗
Local parameter setting
[MODE]
〖
CH E3
〗
Display current wireless channel(default is E3)Can be
selected from 00 to FF, press [ZERO] to adjust digit,
press [TARE]to move digit
[MODE]
〖
AddrH
〗
Address code high 4bits,Used for wireless net, sole
instrument don’t adjust
[MODE]
〖
00CCC
〗
press [ZERO] to adjust digit,
press [TARE]to move digit
[MODE]
〖
AddrL
〗
Address code low 4bits,Used for wireless net, sole
instrument don’t adjust
[MODE]
〖
CCCCC
〗
press [ZERO] to adjust digit,
press [TARE]to move digit
[MODE]
〖
pAirH
〗
Pair code high 4bits,Used for wireless net, sole
instrument don’t adjust
[MODE]
〖
H0000
〗
press [ZERO] to adjust digit,
press [TARE]to move digit
[MODE]
〖
pAirL
〗
Pair code low 4bits,Used for wireless net, sole
instrument don’t adjust
