Vestil SWA-50, Инструкция по эксплуатации

Страница: 13 / 19

Table of Contents Rev. 9/19/2018 SWA, MANUAL
cord into the pigtail cord of the mast control enclosure; then plug the power cord for the mast
into a 115 VAC receptacle.
8. Test the powered functions:
a. Turntable rotation: press the foot pedal to initiate rotation. The turntable will rotate as long
as the pedal is pressed.
b. Delta speed controller: refer to the Delta operation manual.
c. Powered mast models: raise and lower the stretch wrap carriage with the UP and DOWN
buttons on the pendant (hand) controller. Confirm that the carriages moves smoothly and
that both the upper and lower travel limit switches function properly.
Item
no.
Part no. Description Quantity
1 20-014-116 Frame, rod, wrap retainer 1
2 20-014-006 Tube retainer (bottom) 1
3 20-014-005 Tube retainer (top) 1
4 20-110-002 Bearing, ball,
3
/
4
in., shield 1
5 68061 1
5
/
8
in. retainer ring 1
6 20-113-022 Spacer, lock 1
7 20-113-003
7
/
8
in. fiber washer 1
*8 SRF-18
20in. plastic wrap (not
included)
1
The wrap holder accommodates 10-20 inch
rolls of stretch wrap.
Loading stretch wrap:
1. Unwind the wing nut (A) sufficiently to
remove the lock spacer (6) underneath the
bottom retainer (2).
2. Remove the lock spacer.
3. Remove the retainer (5) and bearing (4).
4. Remove the spent roll of stretch wrap and
install a new roll.
5. Reinstall the retainer (5) and secure it in
place with the lock spacer (6).
6. Tighten the wing nut (A) until the roll is
snugly grasped between the tube retainers
(2) and (3). Adjust the tightness of the wing
nut to achieve the desired degree of
material stretch—the material will stretch
more the more tightly the roll is grasped.
Stretch Wrap Holder Assembly
Assembled stretch wrap holder
A
2
1
3
7
7
Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 13 of 19