Vestil MINI-SH, Инструкция по эксплуатации

Страница: 7 / 8

Table of Contents Rev. 8/17/2020 MINI-SH, MANUAL
Table of Contents Created 2019 Vestil Manufacturing Corp. Page 7 of 8
Exploded View and Bill of Materials: MINI-SH-4
Shackle pin
Item Part no. Description Quantity
1 49-514-005 Weldment, adaptor plate 1
2 49-514-006 Weldment, counterweight 1
3 21355
Carriage bolt, round head, zinc finish,
gr. A,
3
/
8
” – 16 x 1”
2
4 33008
Flat washer, low carbon, USS, zinc
plated,
3
/
8
”
2
5 33622
Split lock washer, carbon, steel,
medium zinc finish,
3
/
8
”
2
6 36106 Hex nut, gr. A, zinc plated,
3
/
8
” – 16 2
7 08-145-010 Shackle,
1
/
2
”, 2-ton 1
8 08-145-001 Swivel hook, 2-ton 1
LABELING DIAGRAM
Label content and location are subject to change so your product might not be labeled exactly as shown.
Compare the diagram below to your Record of Satisfactory Condition . If there are any differences between actual
labeling and this diagram, contact Technical Service . Contact information is provided on the cover page of this
manual.
Replace all labels that are damaged, missing, or not easily readable (e.g. faded) from a reasonable distance. To
order replacement labels, or to inquire whether your unit is properly labeled, contact the technical service and parts
department online at http://www.vestilmfg.com/parts_info.htm or by calling (260) 665-7586 and asking for the Parts
Department.
Tag 1041: Safety statements; attached to control cord
near handheld controller
Tag 1041