Rev. 9/29/2017
FBR, MANUAL
Copyright 2017 Vestil Manufacturing Corp. Page 3 of 4
Assembly & Use:
This barrier kit consists of the following components:
Three (3) canvas panels on a PVC frame;
Six (6) double-sided frame connectors.
The barrier system is self-supporting as long as at least 2 panels are connected. To connect panels, begin by
pressing one side of a connector onto the frame of a panel near the top between frame couplers. Install a second
connector below the panel above the frame coupler. Clip the open ends of the connectors onto the frame of a second
panel. The 2-panel barrier will stand on its own if the panels are folded toward or away from each other.
Apply the same process to attach a third panel. A 3-panel barrier can be configured in numerous ways, including a
closed triangle and wavy line. Choose a geometry that best fits your application.
Frame
coupler
Connector pressed
onto frame of
adjacent barriers
Frame
couplers
Panel
Connector pressed
onto frame of
adjacent barriers
