To Charge the unit – Set Green button on control box to “O” and Red button to “I”.
To use the unit –Set Green button to “I” and Red button to “O”
When not in use – Green and Red button both should be on “I”
Running unit on low voltage will damage the batteries
Charging time 6 - 10 hrs for full charge
Charge the unit once a month when not in use
SAFETY
Keep all personnel clear of the machine when it is in operation.
Do not exceed the table’s load rating
Use caution to avoid tipping the when placing or sliding a load onto or off of the table.
Avoid obstacles that can cause the base to sudden stop when moving a loaded table, such as cracks in the
floor or the corners of machines, etc. Doing so could cause the post table to tip over or allow the load to
slide off the table.
Never use the table if it is in need of repairs or if it seems to be malfunctioning
Notify your maintenance personnel if you notice anything out of the ordinary, such as odd noises, erratic
motion, or damage to any part of the table or its components.
ORDERIGN REPLACEMENT PARTS
To order replacement or spare parts for this equipment, contact the factory.
ROUTINE MAINTENANCE & SAFETY CHECKS
Before each use inspect the following, where applicable:
1) Frayed wires
2) Damage or structural deformation to the structural members
3) Unusual noise or binding or evidence thereof
4) Proper functioning of all the switches
5) Battery voltage less than 20V. Unit needs to be recharged
CART-500-LA
, Manual.doc
Page
3
of
6
Copyright 201
7
Vestil Manufacturing Corp.
