VESTEL AOB-3122, Руководство пользователя

Страница: 21 / 30

Fig. 3.10
J
GAS CONVERSION
INJECTORS REPLACEMENT OF HOB BURNERS
The diameter is marked on the injector in cents of milimetre. Select the injectors to be
replaced according to the “Info chart supplied with the injector set”. To replace the
injectors:
• Remove pan-supports and burners from the cooktop.
•Using a spanner, remove the injector “J” (fig.3.10-3.11) from its housing and replace
it by the proper one according to the kind of gas (For correct injector sizes, refer to
the table on page 3).
MINIMUM BURNER SETTING ADJUSTMENT
Check whether the flame spreads to all burner ports when the burner is lit with the
gas tap set to the minimum position. If some ports do not light, increase the
minimum gas rate setting.
Check whether the burner remains lit even when the gas tap is turned quickly
from the maximum to the minimum position. If the burner does not remain lit,
increase the minimum gas rate setting.
The procedure for adjusting the minimum gas rate setting is described below.
18