VESTEL 49FB7500, Руководство по эксплуатации

Страница: 74 / 115

English - 73 -
ĐƋ DiSEqC switch: If you have multiple
satellite dishes and a DiSEqC switch ,
select this antenna type. Press OK to
continue. You can set four DiSEqC options
(if available) on the next screen. Press OK
button to scan the first satellite in the list.
TKGS (Türksat Kanal Güncelleme
Sistemi) installation
If desired, you can start a TKGS Installation
if the Satellite broadcast search option is
turned on. Before the satellite search starts, a
menu will be displayed where you can select
to start a
TKGS Installation . Set the Install
Type as Operator and than set the Satellite
Operator as TKGS . Then press the OK
button to start TKGS Installation . Set your
antenna type as described abow. You can
select to install
HD or SD channels during the
installation. This selection can be done later
too using the
Preferred List option under the
Installation>TKGS Installation menu. The
selection will be activated, after switching the
TV off and back on again or after a manual
update as described below.
If wanted
TKGS Installation can be applied
manually after the First Time Installation .
Press the Menu button. Highlight Installation
and press OK . In the sub menu highlight
Satellite Settings and press OK . Then select
Antenna Installation . After the antenna
type is selected and other satellite settings
are made press the
RED button to start a
TKGS Installation .
The second way to apply TKGS installation
manually after the First Time Installation
is starting an update. To do this press the
Menu button and select Installation > TKGS
Installation > Start Update . But to be able
to do so the Satellite Settings should be
done first.
To use the update options of TKGS
TKGS feature keeps your satellite channel
lists up-to-date in three different ways.
Standby: While going into standby mode,
the TV controls the TKGS table version
number whether it is the last version or not.
If any changes are detected, TV starts to
update. On the next switch-on a message
will be displayed to inform the user about
the changes.
Background: When a channel is opened
which isn’t defined in the TKGS channel
lists,
the TV controls the TKGS table version
number whether it is the last version or not.
If any changes are detected, TV starts to
update. When the update is completed a
message will be displayed to inform the user
about the changes.
Manual: An update can be started manually
any time. Press the Menu button. Highlight
Installation and press OK . In the sub menu
highlight TKGS Installation and press OK .
Than select Start Update and press OK .
Analogue: If Analogue broadcast search
option is turned on, the TV will search for
analogue broadcasts after other initial settings
are completed.
Additionally you can set a broadcast type as
your favourite one. Priority will be given to
the selected broadcast type during the search
process and the channels of it will be listed on
the top of the
Channel List . When finished,
press OK to continue.
You can activate Store Mode option at
this point. This option will configure your
TV’s settings for store environment and
depending on the TV model being used, the
supported features of it may be displayed
on the top of the screen as an info banner.
This option is intended only for store use.
It is recommended to select
Home Mode
for home use. This option will be available in
System>Settings>More menu and can be
turned off/on later.
Press
OK button on the remote control to
continue and the Network/Internet Settings