VESTEL 39FB7100, Руководство по эксплуатации

Страница: 74 / 115

English - 73 -
Switching On/Off
TV’yi Açmak için
Elektrik kablosunu, elektrik prizi gibi bir güç
kaynağına bağlayınız (220-240V AC, 50 Hz).
Bekleme konumundan çıkıp TV’yi açabilmek
için aşağıdakilerden birini yapınız:
• Bekleme tuşuna, P/- tuşuna veya
kumanda üzerindeki bir rakam tuşuna basın.
• TV bekleme durumundan çıkana kadar TV
üzerindeki yan fonksiyon tuşuna basınız.
Televizyonu Kapatmak için
TV bekleme moduna girene kadar uzaktan
kumandadaki Bekleme tuşuna veya TV
üzerindeki yan fonksiyon tuşuna basınız.
Televizyonu tamamen kapatmak için
elektrik fişini prizden çekiniz.
NOT: TV bekleme moduna getirildiğinde, bekleme LED’i
Bekleme Modunda Arama, Uydudan Otomatik Yazılım
İndirme ya da Zamanlayıcı gibi özelliklerin aktif olduğunu
belirtmek için yanıp söner. LED, TV’yi bekleme modundan
açtığınızda da yanıp sönebilir.
First Time Installation
When turned on for the first time, the
language selection screen is displayed. Select
the desired language and press OK .
On the next screen, set your preferences
using the directional buttons.
NOTE: Depending on the Country selection
you may be asked to set and confirm a PIN at
this point. The selected PIN cannot be 0000.
You have to enter it if you are asked to enter
a PIN for any menu operation later.
About Selecting Broadcast Type
Digital Aerial:
If Digital Aerial broadcast
search option is turned on, the TV will search
for digital terrestrial broadcasts after other
initial settings are completed.
Digital Cable: If Digital Cable broadcast
search option is turned on, the TV will search
for digital cable broadcasts after other initial
settings are completed. According to your
other preferences a confirmation message
may be displayed before starting to search.
Select YES and press OK to proceed. To
cancel operation, select NO and press OK .
You can select Network or set values such as
Frequency , Network ID and Search Step .
When finished, press OK button.
D-Smart Option
If desired, you can search and store D-Smart
cable channels. On the Network channel
scan screen set the Network option as
DSmart Auto or DSmart Manual . If
manual option is selected, the other options
can be set as desired. When finished, press
OK button.
NOTE: Searching duration will change
depending on the selected Search Step.
Satellite: If Satellite broadcast search option
is turned on, the TV will search for digital
satellite broadcasts after other initial settings
are completed. Before satellite search is
performed some settings should be made.
Tivibu Option
If desired, you can search and store Tivibu
channels. Before the satellite search starts,
a menu will be displayed where you can
select to install Tivibu channels. Set the
Install Type as Operator and than set the
Satellite Operator accordingly. Press OK
to proceed. The TV will start to search for
available broadcasts.
D-Smart Option
If desired, you can search and store D-Smart
channels. Before the satellite search starts, a
menu will be displayed where you can select
to install D-Smar t channels. Set the Install
Type as Operator and than set the Satellite
Operator accordingly.
If you select DSmart operator, next menu
item will be Apartment Installation . If you
are using an individual D-Smart account,
you should skip this step by setting as