English - 58 -
button. You can set a timer for future events.
To cancel an already set timer, highlight that
event and press the
OK
button. Then select
Delete Timer
on Event
option. The timer will
be cancelled.
NOTES:
You cannot switch to any other
channel or source while there is an active timer
on the current channel.
It is not possible to set timer for two or more
individual events at the same time interval.
Teletext Services
Press the
Text
button to enter. Press again
to activate mix mode, which allows you to
see the teletext page and the TV broadcast
at the same time. Press once more to exit. If
available, sections in the teletext pages will
become colour-coded and can be selected
by pressing the coloured buttons. Follow the
instructions displayed on the screen.
Digital Teletext
Press the
Text
button to view digital teletext
information. Operate it with the coloured
buttons, cursor buttons and the
OK
button.
The operation method may differ depending
on the contents of the digital teletext. Follow
the instructions displayed on the digital
teletext screen. When the
Text
button is
pressed again, the TV returns to television
broadcast.
Software Upgrade
Your TV is capable of finding and updating the
firmware automatically via the broadcast signal.
Software upgrade search via user
interface
On the main menu select
System>Settings
and then
More
. Navigate to
Software
upgrade
and press the
OK
button. In
Upgrade options
menu select
Scan for
upgrade
and press
OK
button to check for
a new software upgrade.
If a new upgrade is found, it starts
to download the upgrade. After the
download is completed confirm the
question asking about rebooting the TV
by pressing the
OK
to continue with the
reboot operation.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00
o’clock if
Automatic scanning
option in the
Upgrade options
menu is set to
Enabled
and if the TV is connected to an aerial signal.
If a new software is found and downloaded
successfully, it will be installed at the next
power on.
NOTE:
Do not unplug the power cord while
led is blinking during the reboot process. If the
TV fails to come on after the upgrade, unplug,
wait for two minutes then plug it back in.
J
J
Cleaning and
Maintenance
•
Always unplug the device before starting
cleaning and maintenance.
•
Pay attention to the comments stated in
“Safety Information to Be Observed During
Cleaning and Maintenance”.
•
Do not apply alcohol, solvent containing
chemicals, surface active agents such as
thinner, pesticides, air freshener, lubricant
or cleaning detergent to the product. These
chemicals might cause product to fade away
or crack or removal of labels or instructions.
•
As surface or lenses can crack easily, use only
a soft cloth such as super thin fibre or cotton
cloth to clean the product. As product can
be easily scratched by foreign bodies, beat
out the dust before using the cloth.
Содержание 28HB5100
Страница 1: ...TELEViZYON KULLANIM KILAVUZU SATELLITE 28HB5100 28 LED TV OPERATING INSTRUCTIONS...
Страница 70: ......
Страница 71: ......
Страница 72: ......
