VESTEL 28HB5100, Руководство по эксплуатации

Страница: 48 / 73

English - 47 -
J
J
Connections
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
YPbPr/PC Audio Cable
HDMI
Connection
(back)
SPDIF
SPDIF
(Coaxial Out)
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
AV Cable
HEADPHONE
Headphone
Connection
(side)
PC to YPbPr
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
NOTE: When connecting
a device via the YPbPr or
Side AV input, you must
use the connection cables
to enable connection. See
the illustrations on the
left side. You can use
YPbPr to VGA cable to
enable YPbPr signal via
VGA input. You cannot
use VGA and YPbPr at
the same time. To enable
PC/YPbPr audio, you will
need to use the Side AV
input with a YPbPr/PC
audio cable for audio
connection, using the Side
AV connection cable’s RED
and WHITE inputs. If an
external device is connected
via the SCART socket,
the TV will automatically
switch to AV mode. When
receiving DTV channels
(Mpeg4 H.264) or while
in Media Browser mode,
output will not be available
via the scart socket. When
using the wall mounting
kit (available from third
party in the market, if not
supplied), we recommend
that you plug all your cables
into the back of the TV
before mounting on the
wall. Insert or remove the
CI module only when the
TV is SWITCHED OFF.
You should refer to the
module instruction manual
for details of the settings.
The/Each USB input of
your TV supports devices
up to 500mA. Connecting
devices that have current
value above 500mA may
damage your TV. By
connecting an HDMI cable
to your TV, you have to use
only a shielded HDMI cable
to guarantee a sufficient
immunity against parasitic
frequency radiation.
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.