VESTEL 17MB12, Руководство по обслуживанию

Страница: 46 / 64

Step.6
After
“42”
is seen, Click
“Erase Flash”
Step.7
Select the bin. file from near the
“Load Bin”
Step.8
Click
“Load Bin”
and load the required bin. file.
Step.9
Unpick the I
2
C cable from Chasis
Step.10
Power off and on again TV set to produce hard reset.
Step.11
Initialize the NVM from “
Reset TV-set”
item from service menu
17.2 Analog Software Update Via UART
Step.1
Connect the serial cable from PC Com port to PL104 connector on 17PRG01-1 module
card.
Step.2
Connect the programming cable from SCART(PL103) on 17PRG01-1 module card to
SCART1 connector on TV chassis side.
Step.3
Run a RS232 terminal tool like Hyper Terminal.
Step.4
Following settings of the terminal tool are necessary:
Protocol: Xmodem
Port: COMx
Baud Rate: 115200
Data Bits: 8
Parity: none
Stop Bits: 1
Com. Control: none
Step.5
Load the bin file from
“Browse”
and Click
“Send”
Step.6
Power off and on again TV set to produce hard reset.
18 BLOCK DIAGRAMS
18.1 General Block Diagram