Vestax VMC-185XL, Служебная записка

Страница: 4 / 22

14 15
16
17
18
19
20
21
22
23
24
25
26
-7-
MIC SECTION MASTER SECTION
!4
MAIN MIC IN JACK [1/4" PHONE JACK]
Input jack for MAIN MIC.
!5
SUB MIC IN JACK [1/4" PHONE JACK]
Input jack for SUB MIC.
!6
MAIN MIC LEVE
Adjusts the input level of the MAIN MIC input.
!7
MAIN MIC EQ
【
HI , LOW
】
Adjusts the HI and LOW frequencies for both the
MAIN and SUB MIC input.
!8
MAIN MIC AUX ON/OFF SWITCH
Used to send the signal to the external effect
processor connected to the AUX SEND.
!9
MAIN MIC CUE ON/OFF SWITCH
Used to send the signal from the mic channel to
the monitor section for headphone monitoring.
@0
MASTER LEVEL
Adjusts the signal level of
the master output.
@1
MASTER BALANCE
Adjusts the signal balance
between left and right of
the master output.
@2
SUB MASTER LEVEL
Adjusts the signal level
outputs from SUB
MASTER OUTPUT JACK
on the rear panel.
@3
AUX RECEIVE LEVEL
Adjusts the output level
from AUX RCV JACK.
@4
AUX RECEIVE CUE ON/OFF SW
Used to send the effect
receive signal to the
monitor section for the
headphone monitoring.
@5
MONITOR STYLE SELECT SWITCH
When this switch is set to
"SPLIT", the master signal
is always heard through
the right ear-cup of the
headphones. The signal
selected by MONITOR
SELECT SWITCH will be heard in the left ear-
cup. This enables both programs to be
monitored simultaneously, thus assisting in
beat mixing. When this switch is set to
"STEREO", no master output is heard in the
headphones, and only the signal selected by
MONITOR SELECT SWITCH will be heard in
both ear-cups.
@6
MONITOR LEVEL
Adjusts the headphone monitor level.
@7
HEADPHONE JACK
Connect the headphones with the impedance
of 8ohm to 600 ohm.
@8
LED LEVEL METER
The LED bar level meters indicate the L and R
outputs.
@9
POWER INDICATOR
Lights up when the POWER SWITCH is on.