background image

-3-

IMPORTANT SAFEGUARDS

 

READ BEFORE OPERATING EQUIPMENT

 

 This product was designed and manufactured to meet strict quality and safety 
standards.  There  are,  however,  some  installation  and  operation  precautions 
which you should be particularly aware of.

1.Read instructions-All the safety and operating 

instructions  should  be  read  before  the 
appliance is operated. 

 
2.Retain  instructions-The  safety  and  operating 

instructions  should  be  retained  for  future 
reference. 

 
3.Heed Warnings-All warnings on the appliance 

and  in  the  operating  instructions  should  be 
adhered to. 

 
4.Follow  Instructions-All  operating  and  use 

instructions should be followed. 

 
5.Cleaning-Do  not  use  liquid  cleaners  or 

aerosol  cleaners.  Use  a  damp  cloth  for 
cleaning. 

 
6.Attachments-Do  not  use  attachments  not 

recommended  by  the  product  manufacturer 
as they may cause hazards. 

 
7.Water  and  Moisture-Do  not  use  this  product 

near  water-for  example,  near  a  bath  tub, 
wash  bowl,  kitchen  sink,  or  laundry  tub,  in  a 
wet basement, or near a swimming pool, and 
the like. 

 
8.Accessories-Do  not  place  this  product  on  an 

unstable  cart,  stand,  tripod,  or  table.  The 
product  may  fall,  causing  serious  injury  to  a 
child  or  adult,  and  serious  damage  to  the 
appliance.  Use  only  with  a  cart,.  stand, 
tripod, bracket, or table recommended by the 
manufacturer,  or  sold  with  product.  Any 
mounting  of  the  appliance  should  follow  the 
manufacturer's instructions, and should use a 
mounting  accessory  recommended  by  the 
manufacturer.  

9.This product should never be placed near or 

over a radiator or heat register. This product 
should  not  be  placed  in  a  built-in  installation 
such  as  a  bookcase  or  rack  unless  proper 
ventilation  is  provided  or  the  manufacturer's 
instructions have been adhered to. 

 
10.Power  sources-This  product  should  be 

operated only from the type of power source 
indicated on the marking label. If you are not 
sure  of  the  type  of  power  supply  to  your 
home, consult your appliance dealer or local 
power company. 

 
11.Lightning-For  added  protection  of  this 

product during a lightning storm, or when it is 
left  unattended  and  unused  for  long  periods 
of time, unplug it from the wall outlet. This will 
prevent  damage  to  the  product  due  to 
lightning and power-line surges. 

 
12.Overloading-Do  not  overload  wall  outlets 

and  extension  cords  as  this  can  result  in  a 
risk of fire or electric shock. 

 
13.Object and Liquid Entry-Never push objects 

of  any  kind  into  this  product  through 
openings  as  they  may  touch  dangerous 
voltage  points  or  short-out  parts  that  could 
result  in  a  fire  or  electric  shock.  Never  spill 
liquid of any kind on the product. 

 
14.Servicing-Do not attempt to service product 

yourself as opening or removing covers may 
expose  you  to  dangerous  voltage  or  other 
hazards.  Refer  all  servicing  to  qualified 
personnel. 

 
 
 

PMC05ProSL-E    04.7.13  11:22  AM    ページ 4

Содержание PMC-05ProSL VCA

















Отзывы: