Vestax Mixing Controller, Руководство пользователя

Страница: 6 / 8

MICROPHONE,
SUB INPUT SECTION
LINE 4 IN
MIC
OFF
POST
ON OFF
EFFECT
CUE
L R
MAX MIN
MIC-1
MIC-1 MIC-2
MAX MIN
MIC-2
+16dB -16dB
HI
+16dB -16dB
LOW
EQ
14
9
11
10
12
13
MICROPHONE, SUB INPUT SECTION
9. LINE INPUT JACK(LINE4)
Input connectors for line level equipment such as CD players,tape decks ,DATs, or
MDs ETC.
10. MIC INPUT JACK(MIC1,2)
Input jacks of mic1, mic2.
11. MIC LEVEL
Adjusts the input level from all of the microphone inputs.
12. MIC EQUALIZER(HI,LOW)
Adjusts the HI and LOW frequencies for all of the
microphone input.
13. EFFECT SWITCH
Used when sending signal to the external effect
processor connected to the effect SEND/RETURN.
14. CUE SWITCH
Used to send the signal from the mic channel to the
monitor section for head phone monitoring.
MASTER SECTION
15. MASTER OUT LEVEL METER
The LED level meters indicate the signal level of the
line out.
16. CUE LEVEL METER
The LED level meters indicate the signal level of
PGM input selected by CUE SWITCH.
17. EFFECT SEND LEVEL
Used to adjust the output level from EFFECT SEND
JACK. The signal is selected by the effect switch.
18. EFFECT RETURN LEVEL
Used to adjust the input revel from the EFFECT
RETURN JACK. This EFFECT RETURN can be
used as the sub line input.
19. EFFECT CUE SWITCH
Used to send the signal from EFFECT RETURN
JACK to the monitor section for headphone
monitoring.
20. MASTER BALANCE VOLUME
Adjusts the signal balance of left to the right side of
the outputs from the OUTPUT jack on the rear
panel.
21. MASTER LEVEL VOLUME
Adjust the signal level output from the OUT PUT
jack on the rear panel.
22. SPLIT CUE SWITCH
When this switch is ON, the master signal is always
heard through the right earcup of the headphone.
The CUE signal will be heard in the left earcup when
that input is selected by the CUE SWITCH (5, 14).
This enables both programas to be monitored
simultaneusly,thus assisting in beat mixing.
23. HEAD PHONE LEVEL
Adjusts the headphone output level.
24. HEAD PHONE JACK
Use this jack to connect the headphones the
inpodance 8ohm to 600ohm can be used, 150ohm is
recommended.
ON OFF
CUE
EFFECT
MASTER
MONITOR
MASTER CUE
MAX MIN
SEND
MAX MIN
RETURN
R L
BAL
MAX MIN
LEVEL
SPLIT CUE
PHONES
IN
MAX MIN
ON
OFF
PHONES
LEVEL
L R
+
8
+
8
+
5
+
5
+ 3 + 3
+ 1 + 1
0 0
-1 -1
-3 -3
-5 -5
-7 -7
-10 -10
-15 -15
POWER POWER
24
23
22
21
20
19
18
17
16
15
MASTER SECTION