Vestas V105-3.45 MW, Инструкция по эксплуатации

Страница: 23 / 33

7.4.2 Rescue route from the hub platform (H: Hub)
0011461404
Figure 7.16: Rescue route through spinner hatches and anchor points shown for descent
device
1 Spinner hatch 2 Anchor points
Rescue from the hub to the nacelle is done as follows:
•
From the hub platform: through the manhole in the hub.
•
Bu use of a descent device through one of the hatches in the spinner cover (nose cone). The
descent device must be attached to one of the anchor points.
A stretcher should not be used during rescue from blade or hub. If relevant, the
injured person should be secured in a stretcher at the nacelle rear platform.
It is not recommended to retrieve an injured person from the hub area to the nacelle through the
gap between the hub and the spinner cover. This route is only suitable for a person who can
move without help or with minimal assistance.
Evacuation, escape and rescue instruction for onshore wind turbine
Document no.: 0067–2397 V00 · Class: RESTRICTED · Type: T09
Page 23 of 33