Configuration
Function
Active delay
Set the function active time in minutes. When during this time the function conditions
stay true, the function becomes active.
Inactive delay
Set the function inactive time in minutes. When during this time the function conditions
stay false, the function becomes inactive.
Tilting
Set the desired tilting type for the temperature active state. This can be none, fixed or
during the day.
4.7.4 Wind-function
Global settings
Group
Group
selection.
Alias
Shows the alias of the current selected group.
Enabled
Enable or disable the wind function.
Wind settings
Threshold
Set the wind speed threshold. The wind speed threshold must always be above the wind
speed threshold of the wind direction function.
Assigned sensors
Sensor
Gives a list of all possible sensors which can be assigned to this function. When moving
the cursor over the different sensor indexes, the alias will show the corresponding name
of that sensor. When assigning more than one sensor to this function, the highest meas-
ured value of the assigned sensors will be used.
Alias
When the cursor is on a sensor index, the alias shows the corresponding name of that
sensor, otherwise this will be blank.
Function
Active delay
Set the function active time in seconds. When during this time the function conditions stay
true (wind speed equal or more than the threshold level), the function becomes active.
Inactive delay
Set the function inactive time in minutes. When during this time the function conditions
stay false (wind speed below threshold), the function becomes inactive.
- 69 -
Picture 27: Menu wind function
The wind function will steer the sunshade as func-
tion of the measured wind speed.
Содержание Vesta Building Controller
Страница 2: ......
