Vestamatic Vesta Building Controller, Инструкция по установке и эксплуатации

Страница: 29 / 38

Configuration
4.7.2 Sun function
Global settings
Group
Group selection.
Alias Shows the alias of the current selected group.
Enabled Enable or disable the sun function.
Sun threshold
Low Sun threshold low value. When the sun intensity is below this threshold for the pro-
grammed inactive time, the sun function will become inactive. In that case the sunshade
will be retracted (when no other function with a higher priority is active). The sun low
threshold must always be below the high threshold.
High Sun threshold high value. When the sun intensity is equal or higher than the pro-
grammed high threshold for the programmed active time, the sun function will become
active. In that case the sunshade will be extended (when no other function with a higher
priority is active). The sun high threshold must always be above the low threshold.
Assigned sensors
Sensor Gives a list of all possible sensors which can be assigned to this function. When moving
the cursor over the different sensor indexes, the alias will show the corresponding name
of that sensor. The sensor index can have the following states:
Alias When the cursor is on a sensor index, the alias shows the corresponding name of that
sensor, otherwise this will be blank.
- 67 -
Picture 25: Menu sun function
The sun function will steer the sunshade as function
of the measured sun intensity.
Sensor is not assigned to function, cursor is not on this sensor index.
Sensor is assigned to function, cursor is not on this sensor index.
Sensor is not assigned to function, cursor is on this sensor index.
Sensor is assigned to function, cursor is on this sensor index.
When assigning more than one sensor to this function, the highest measured value of
the assigned sensors will be used.