Automatic mode Introduction
Push the selector switch to (A), all the way to the left until you
hear the “click” in order to activate the automatic mode.
The automatic mode is now activated and the roller shutter will
move up and down at the programmed times. Regardless of the
programmed times, it is still possible to move the roller shutter
up and down by pressing the up or down button and the pro-
gramming remains unaffected.
If you press the up or down button longer than 2 seconds, the
roller shutter moves up or down.
Simply press the opposite button to stop the motion, i.e.:
·
press the down button, if the roller shutter is moving up,
·
press the up button, if the roller shutter is moving down.
The roller shutter will only move up or down again after the up
or down button has been pressed.
By simply pushing the selector switch to manual mode (H), the
automatic mode can be interrupted for an extended period of
time.
After selecting the automatic mode again, the
Vestamatic
Rollmat
Plus V3.1
roller shutter control will execute the last pending com-
mand from the automatic mode. The last pending command will
also be executed when resetting after power failure.
- 37 -
G
Basic functions General
After the installation has been completed correctly (for instruc-
tions please see pages 55 to 58), you can start programming.
Important: Please note that the
Vestamatic
Rollmat Plus V3.1
roller shutter control cannot be programmed in case
of power failure.
Carefully pull to remove the cover cap and press the reset button
with a ball-point pen or something else suitable.
Pressing the reset button will activate the default times prepro-
grammed by the manufacturer.
·
Current time –
0ß8:0ß0
·
Up time –
0ß6:0ß0
·
Down time –
2ß0:0ß0
On the following pages, you will find instructions how to cus-
tomize these times to your personal requirements.
- 38 -
G
83101211 F1.qxd 24.09.01 16:42 Seite 39
