Vestamatic IF SMI KNX 230VAC 16, Руководство пользователя

Страница: 1 / 4

Subject to modifications. © Vestamatic GmbH
Art.-Nr.: 3060 002 DE 0319 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.de
1/4
G
IF SMI KNX 16
IF SMI KNX
230 VAC / 24VDC 16
Installation and Operating Instructions
IF SMI KNX 230VAC 16
Art.- no. : 01092517
IF SMI KNX 24VDC 16
Art.- no .: 01092516
Motor control for operating of
230VAC or 24VDC LoVo SMI drives
G
3060 002 GB 0319 A03
1. Basic safety instructions
1.1 Intended use
1.2 Foreseeable misuse
1.3 Personnel’s qualification
1.4 Signage
2. Product description
3. Declaration of conformity
4. Technical data
5. Installation / Mounting
5.1 Electrical connection – Overview
5.2 Configuration
5.3 Commissioning / Test run
6. Design and Function
6.1 Complete overview
6.2 Control and display elements
6.3 Local operation
7. Operation
7.1 Manual operation
7.2 Automatic operation
8. Troubleshooting
9. Re­learn motor addresses
10. Maintenance
11. Warranty
12. Disposal of waste
13. Service / Contact
CONTENTS
CAUTION!
Material damage!
Incorrect wiring and configuration of the device can lead to dam­
age up to total failure.
– Ensure that the supply voltage corresponds to the specifica­
tions from the technical data for the device.
– Ensure that all external devices like push buttons and motors
are connected correctly according to the wiring diagrams.
– Refer to technical documentation of the motor manufacturer
for notes on required settings such as relais switching times.
– Refer to the software­helpfile for details on the configuration.
Ä
1. Basic safety instructions
DANGER!
Danger of life!
There is a risk of life when touching live parts.
– All tasks must be carried out exclusively by qualified personnel.
– Disconnect all power supplies before starting work.
1.1 Intended use
The motor control units are intended to control drives for blinds, awnings,
large louvre blades, roller shutters, windows, light domes, etc. within the
specified limits.
Any other use or extended use is considered to be improper.
1.2 Foreseeable misuse
Any use for a purpose other than the above mentioned purpose is improper.
The risk of improper use or misuse is borne solely by the operator.
All types of claims due to damage arising from improper use are excluded.
1.3 Personnel’s qualification
Improper use can cause considerable personal injury and material dam­
age!
All tasks for installation, connection and commissioning must be carried
out exclusively by a qualified electrician.
A qualified electrician is able to carry out work on electrical installations
due to her/his professional training, knowledge, and experience as well as
knowledge of the relevant standards and regulations. She/he can identify
and avoid possible dangers.
The qualified electrician is trained for the specific place of employment
in which she/he is working and is aware of the relevant standards and
regulations.
1.4 Signage
Symbol Meaning
Ä
General warning
Electrostatic discharge
p
CE label
This product complies with the essential requirements. The
Declaration of Conformity concerning this product is available on
our website: www.vestamatic.com
3. Declaration of conformity
p
2. Product description
The motor control units are designed for the control of max. 16 LoVo drives
230 VAC or 24 VDC with SMI interface for blinds, awnings, large louvre
blades, roller shutters, windows, light domes, etc. in a KNX bus system.
Each device has 4 lines and inputs for the connection of 4 conventional
blind switches or 8 potential­free contacts.
Each channel or motor can be controlled individually via the KNX bus
and operating states, position and fault messages for the connected
drives / blinds can be transmitted.
Art.-no. Article description
01092517 IF SMI KNX 230VAC 16
01092516 IF SMI KNX 24VDC 16