Vesta Rome VRH-ROME-30SS, Руководство пользователя

Страница: 13 / 28

Wire sizes (copper wire only) and connections must conform with the rating
of the appliance as specified on the model/serial rating label. Wire sizes must
conform to the requirements of the National Electrical Code ANSI/NFPA 70 —
latest edition*, or CSA Standar ds C22. 1-94, Canadian Electrical Code Part 1
and C22.2 No. 0-M91 - latest edition** and all local codes and ordinances.
A U.L. - or C.S.A. - listed conduit connect
or must be provided at each end of the
power supply cable (at the range hood and at
the junction box).
Copies of the standards listed may be obtained from:
National Fire Protection Association
Batterymarch Park Road
Quincy, Massachusetts 02269
CSA International
8501 East Pleasant Valley
Cleveland, Ohio 44131-5575
Preparation
Advanced Preparations:
1
.
Read the entire installation guide and user manualthoroughly, understand
instructions and warnings.
2. Be familiar with the controls of the range hood by reading through Operations
Page 18
.
3. Place the range hood on a flat, stable surface. Connect the range hood to
a designated standard outlet
(please
refer t h e product label for the suitable
voltage of this unit) an d verify no debris has entered the vent openings, then
turn on the range hood. Verify all operations of the range hood by referring to
Operations, Page 18
.
4. Place all supplied parts and required hardware on a flat, stable surface and
verify the existence of all supplied parts listed on Page 9.
5 . Carefully remove the white plastic protective coat from the chimney covers
and range hood if any.
13