possible under a vent hood, in compliance with all applicable regulations in force. This will ensure
that all burnt gases produced during the combustion process are completely exhausted.
10. After installation, keep the appliance stable and level. Do not tilt or sway during operation.
11. Before installation, remove the outer plastic films.
12. Do not use gas that not applicable to the appliance as fuel, neither does high-pressure or
medium-pressure regulating valve. (This appliance is only applicable to low-pressure regulating
valve.)
13. Before installation, a quick acting disconnecting valve should be installed upstream the
appliance where is easy to reach.
14. Making sure the applicable gas is the same as the supplied one. If not, stop using.
15. Pipeline connected to the appliance should be metal pipe fitting.
16. If the pressure of the gas pipeline is 10% higher or lower than the rated pressure the appliance
required, a regulator should be installed to ensure it reaches the rated value.
17. After connecting the appliance to the gas system, check for leaks at joints and pipe fittings; to
do so, use soapy water or a specific leak detector (spray). “No Flaming!”
4.3Special Notice
1. Installation, initial use and maintenance should be done by professional or licensed personnel
or franchised person approved by manufacturer.
2. Please keep the integrity of the appliance and remove the outer packaging. If you do have any
questions, call the specialist and stop using the appliance. To avoid danger, keep the packing
materials away from children. (For the materials are plastic bags, nails etc.)
3. For initial use, the duration of ignition may be a little longer due to the air existing in the new
pipeline. If it cannot be lit up for the first time, turn the ignition switch off and turn it on 3 minutes
later to prevent from deflagration.
4. Do not use gas that not applicable to the appliance as fuel, neither does high-pressure or
medium-pressure regulating valve. Making sure the applicable gas is the same as the supplied one.
If not, stop using.
5. To avoid hazard, turn the appliance off if not going to used it or if it is unattended.
6. This product is a commercial machine that needs to be operated by trained personnel, not
applicable for household use.
7. This product is only for commercial use, not suitable for other uses, or it may cause danger.
8. Do not dismantle or self-modify the appliance. Dismantlement and self-modification may cause
casualty.
9. Do not pat the product or put any heavy objects onto it. Nor do place any other substance in the
vent of the gas heater. Obstruction may do harm to health.
10. Abnormal operation may lead to appliance damage and danger.
11. High temperature may cause scald. Do not touch the appliance directly with hands due to high
temperature during or after operation.
12. Do not destroy the control panel with hard or sharp objects.
13. Do not aim at the appliance with water jet during cleaning, that may damage the electrical
equipment or control valve etc.
14. To prevent surface oxidation and chemical interaction, the stainless steel surfaces should be
cleaned appropriately and regularly.
Содержание REB-02-L
Страница 1: ...REB 02 L Gas Salamander User s Manual ...
