Vesta DWV303DB, Руководство пользователя

Страница: 13 / 16

11
CAUTION
!
!
WARNING
!
!
WARNING
!
!
When the cycle is complete, always relieve water pressure
from the inlet hose:
- Close the HOT water supply at the faucet.
- Disconnect the Power Supply Cord
For Built-In Installations
Periodically inspect and replace hoses if bulges, kinks,
cuts, wear, or leaks are found. Remove and clean the fi lters
and the water valves. Replace the inlet hose as needed to
reduce the risk of hose failure.
For Countertop Installations
Release water pressure from inside the fi ll hose by
pressing the “red” Bleeder Button on the Quick Connect
Assembly until the water fl ow stops. Then, disconnect the
Quick Connect Hose Assembly from the faucet by pulling
down on the outer collar.
When the dishwasher is not in use, place/store the hose
on a hanger hose bracket or similar hanging device.
Appliances that are to be discarded must be made
unusable. Before discarding, remove the door to the
washing compartment.
DO NOT LET CHILDREN DISCONNECT THE
DISHWASHER QUICK-CONNECT HOSE
ASSEMBLY. Close supervision of children is
always important around appliances.
To relieve water pressure that’s inside the water
inlet hose, fi rst close the water line (faucet). Then
press the Bleeder Button on the Quick Connect
Assembly until the fl ow of water stops.
BEFORE DISCONNECTING THE QUICK-CON-
NECT ASSEMBLY FROM THE FAUCET, ALWAYS
RELIEVE WATER PRESSURE. Failure to do so
will result in back-pressure overspray. Back-
pressure overspray could cause severe burns
and/or scalding as the temperature of incoming
water could be very hot.
DISCONNECTING YOUR DISHWASHER
USE AND CARE GUIDE