7
8. After installation, keep the appliance stable and level. Do not tilt or sway during
operation.
9. Before installation, remove the outer plastic films and clean the residue on stainless
steel sheet with appropriate substance.
10. Check that the device is pre-set to use the gas family or voltage available at the place
of installation. Before installation, make sure that the supply gas (voltage) is the same
as the gas (voltage) that the device allows to use.
11. Do not use gas that not applicable to the appliance as fuel, neither does
high-pressure or medium-pressure regulating valve. (This appliance is only
applicable to low-pressure regulating valve.)
12. The supply voltage should comply with the working voltage of the appliance.
13. Do not place flammable substance (e.g. towel etc.) on anywhere of the furnace
surface, otherwise, it may cause fire hazard.
14. After working, turn off the gas valve and power switch immediately.
15. If gas leakage is found, turn off the gas valve immediately and open the windows to
ventilate. Do not turn the power and switches on or off. Reuse the appliance after
maintenance.
16. Vicinity of the mounting position should not store flammable or explosive objects. The
ambient temperature should be lower than 45
℃
and the relative humidity should be
below 85
％
.
4.3 Special Notice
1. Installation, initial use and maintenance should be done by professional or licensed
personnel or franchised person approved by manufacturer.
2. Please keep the integrity of the appliance and remove the outer packaging. If you do
have any questions, call the specialist and stop using the appliance. To avoid danger,
keep the packing materials away from children. (For the materials are plastic bags,
nails etc.)
3. To avoid hazard, turn the appliance off if not going to used it or if it is unattended.
4. This product is a commercial machine that needs to be operated by trained personnel,
not applicable for household use.
5. This product is only for commercial use, not suitable for other uses, or it may cause
danger.
6. Do not sway or tilt the appliance during operation.
7. Do not dismantle or self-modify the appliance. Dismantlement and self-modification
may cause casualty.
8. Before cleaning, unplug and cut off the power supply.
9. During cleaning, do not aim at the appliance with water jet. Water may conduct
electricity, it may cause electric shock due to leakage.
10. Do not pat the product or put any heavy objects onto it. Do not place any objects in
the smoke vent. Obstruction of smoke exhaustion may do harm to health.
