Vesta Precision Imersa Tower, Руководство пользователя, Страница: 8 / 21

7
3. Temperature and Timer Selection Button (Temp/Time)
Press the “Temp/Time” button to toggle between setting
temperature or time. When pressed once, the temperature
display blinks and pressing “+” or “–“ sets the target temperature.
When pressed a second time, the timer display blinks and pressing
the “+” or “-“ sets the target time.
After approximately 10 seconds with no change to the selected
option made, the device will exit the temperature/timer setting
mode. Press Temp/Time again to enter the setting mode.
Press and hold the “Temp/Time” button for 3 seconds to show the
currently set temperature and time.
4.
Start/Stop Button
When in standby mode, press the “Start/Stop” button once to start
the heater and pump to pre-heat the water bath to the desired
temperature.
When the desired temperature is reached, the device will beep
three times. To start cooking, place the vacuum sealed item(s) into
the water bath and press the “Start/Stop” button to start the timer.
The timer will begin counting down to 00:00 and the flame icon will
still be illuminated to show the unit is actively maintaining the
desired temperature.
When the timer runs down to 00:00 and beeps or when finished
cooking, press the “Start/Stop” button to stop the device. The
timer will stop, and the flame icon will no longer be illuminated.