Vesta Precision Imersa Tower, Руководство пользователя, Страница: 11 / 21

10
COOKING SOUS VIDE
1. Select an appropriate sized container and fit the Imersa Tower
to the side.
a) Secure the device to the side of the container by pressing
the Control Panel Release button (Product Component
④
) to rotate the Control Panel up (open the gap
between it and the main body).
b) Insert the device into the container placing the control
panel outside the container.
c) Press the Control Panel down to clamp against the outside
of the container.
2. Add water to the container, to a level above the MIN line and
below the MAX line on the back of the device. NOTE: Take into
consideration the displacement of the food items to be
cooked.
3. Set the container on a suitable heat protection mat (cork, etc.)
and plug in the device. The Control Panel display will illuminate
for 2 seconds and beep before entering power saving mode
4. Press the Power button to enter Stand By mode.
5. Press "°C/°F" to select the temperature display unit for the
device. The initial default is °C. The selected value will be
stored in memory for the next time you turn on the device.
6. Click “Temp/Time” to set the temperature. While the
Temperature value is flashing, adjust the value with the “+” and
“-” keys.
7. Click “Temp/Time” to set the timer. While the Timer is flashing,
adjust the value with the “+” and “-” keys.
8. After the temperature and timer settings are complete, click
“Start/Stop” to start heating cycle. The Flames icon will pulsate
while the heater and pump are active.