19
Before Use
Connector connection (cont.)
Pin assign
From wiring side: 4 – GND, 1 - +24V
Power Supply Adapter
Use the power adapter (AD24-IT) which is specifically designed for use of the F120R-E.
The AC adapter plug is a 3-pronged plug.
Connect this to a power outlet that has a ground terminal.
Daily Checks
Check the F120R-E for inspection before use.
･
Dust on electrodes
･
Loosened connector
･
Damaged or loosened parts
･
Adhering condensation or water droplets
If damage or trouble is detected, contact the supplier for servicing to avoid accidents.
Operation
Power
Power is turned on by pressing the Power switch.
H.V. lamp and fan lamp light up in green, and then the unit
start the operation.
When you press the power switch again, power is turned
off.
Fan speed
The fan’s airflow volume can be adjusted in three steps [LO - MD - HI].
Please adjust the air with the Airflow switch.
Variable louver
The airflow direction angle at the front cover can be changed to set the static erasing range.
Straight
Wide angle
This is useful when the charged object is relatively far
or when you need to eliminate static electricity at high
speed.
This is useful when you need to eliminate static
electricity in wide range.
