NORMAL ROTATION/
REVERSE ROTATION SWITCH
CAUTION:
Do not keep pressing the switch
after the power tool turns off automatically.
Internal parts may be damaged.
The sliding direction of the switch on this product
allows it to rotate in the desired rotation.
- CW
: To rotate the spindle clockwise, slide the switch
forward to rotate it, and the LED light will turn on at
the same time. When you release your hand from
the switch, the switch returns to the neutral position
and rotation stops, but the LED light will turn off
after 5 seconds.
- CCW
: To rotate the spindle counterclockwise, slide
the switch backward to rotate it, and the LED light
will be turned on at the same time. When you
release your hand from the switch, the switch
returns to the neutral position and rotation stops,
but the LED light will turn off after 5 seconds.
Grip for switching
LED lighting
CAUTION:
Do not look directly into the
LED light.
Your eyes could be damaged.
CAUTION:
Continually carrying out heavy
loads may cause malfunctions.
If the work
load is too heavy, the product protection function
will be activated. When the product protection func-
tion is activated, the charging lamp blinks and the
product does not operate.
- Fully automatic spindle locking (Auto-lock):
When the switch is in neutral position, turning the
power tool manually will lock the spindle and tight-
en the screw. It allows the screw to be tightened
even when the battery is empty, which allows the
power tool to be used as a manual screwdriver.
Grip for hand tightening
CAUTION:
Do not slide the switch while the
spindle is locked and the screw is manually
tightened.
The power tool may be damaged.
- Working advice:
Apply the power tool to the screw only when it
is switched off.
Rotating tool inserts can slip off.
MAINTENANCE AND CLEANING
Periodic inspection
- Loose screws, damage or malfunction.
CAUTION:
Before any work (e. g., mainte-
nance, tool change,etc.) as well as during
transport and storage, set the rotational
direction switch to the neutral position.
Unin-
tentional actuation of the switch can lead to injuries.
For safe and proper working,
always keep the tool
clean
.
CAUTION:
A reinforced plastic cover is
used. Do not use detergents or the follow-
ing chemicals to wipe the surface. Risk of
cracks, electric shock, or failure.
- Benzine,
Thinner, Ketone, Ether and other similar chemicals
DISPOSAL
Do not dispose the power tool in your house-
hold waste! Take your tool to an authorized
VESSEL agent where it will be disposed of in
an environmentally safe way.
WARNING:
Risk of fire or injury.
Do not
attempt to disassemble the battery or remove any
component.
CW
CW
CCW
Sliding Direction
CCW
6
