Vesper CORTEX H1, Руководство по установке

Страница: 21 / 24

21
Compliance
RF Exposure Compliance Statement
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0 mm should be
maintained between the user’s body and 25 mm from front of face.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment complies with IC RSS-102
radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Cet équipement est conforme aux limites d’exposition aux radiations IC
CNR-102 établies pour un environnement non contrôlé. Cet émetteur ne
doitpas être situé ou fonctionner conjointement avec une autre antenne ou
un autre émetteur.
Specific Absorption Rate (SAR) Values
This product transmits and receives radio signals. It is designed and
manufactured not to exceed the emission limits for exposure to Radio
Frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless products employs a unit of measurement
known as the Specific Absorption Rate, or SAR. In the United States and
Canada, the SAR limit for a handheld device is 1.6 watts/kg (W/kg) averaged
over one gram of tissue, or 4.0 watts/kg (W/kg) averaged over ten grams
of tissue. The highest SAR value for your handset is 0.01 W/kg (1 g) when
tested for use Front of Face (25mm) and 0.07 W/kg (10 g) for Extremities
(0mm).
Regulatory Information
To view regulatory marks and related information;
> Main Menu. Touch on the wrench icon ( ) to open the
Configuration Menu.
> Systems > Certifications.
Water Resistant Properties
Cortex handsets are water and dust resistant in compliance with the
Ingress Protection rating IPX8 and have undergone testing in a controlled
environment.
Cortex handsets are proven to be water resistant in certain circumstances
(the handsets meet the requirements of classification IPX8 as described
by the international standard IEC 60529 - 2013 Degrees of Protection
provided by Enclosures [IP Code]; test conditions: 23±3°C/73.4±5 °F, R.H.
approximately 2 meters, for 60 minutes).
Do not use the handset in the following environments:
- Do not immerse the handset in a hot spring.
- Do not swim while wearing this handset.
- Do not immerse the handset in water deeper than approximately 2m.
- Do not immerse the handset in water for longer than 60 minutes.
- Do not place the handset directly on sand or mud.
- Do not mount the handset in places where it may be sprayed with
high pressure water or submerge it in water for extended periods of
time, the handset is not designed to withstand high water pressure.
If the handset has been immersed in water or if the microphone or speaker
has gotten wet, VHF sound quality may be affected.
The handset’s water and dust resistant features may be damaged by
dropping or receiving an impact.