2021/08/30 08:42
1/20
SLICE-DHV Dual-Channel High-Voltage Amplifier
Product Manuals - https://www.vescent.com/manuals/
SLICE-DHV Dual-Channel High-Voltage
Amplifier
The SLICE-DHV is a low-noise, high-bandwidth, high-voltage source with DC bias control and
sweep capabilities. It is designed for controlling piezoelectric transducers used for precision
positioning, with particular application to laser frequency stabilization. The high-voltage output
can range from 0 to 200 V, has a voltage noise <500 µV rms, can drive ±200 mA, and has an
unloaded small-signal (±10 V) bandwidth >1 MHz. The SLICE-DHV also has a user-settable
voltage limit for safe operation at voltages less than 200 V.
The SLICE-DHV features two Gain values: G=1 and G=20 for the input modulation signal. When G
is set to 1, the output range is limited to ±10V from the user-settable DC bias voltage. When the
Gain is set to 20, the modulation input signal allows access to the full range of the SLICE-DHV
(0-200 V). When the Gain is set to 1, the SLICE-DHV has better noise performance than when the
Gain is set to 20.
The SLICE-DHV is not recommended for applications that require a large-signal bandwidth greater
than 20 Hz, defined for modulation amplitudes more than 10 V.
Model No. SLICE-DHV
Document Revision: 1
Document Last Updated on 2021/08/26 14:26
and
prior to operating the SLICE-DHV.
Potential for electrical shock hazard. The
SLICE-DHV can deliver up to 200 V at its
output. Use caution when device is turned
on & enabled.
Useful Links
Click here for the
Click here for the
Click here for the
Click here for the
Github page for SLICE-DHV firmware revisions
Please check back for added functionality. Contact
corrections, or to request added functionality.
