15
ORIGINAL INSTRUCTIONS
VES Andover Ltd Eagle Close Chandlers Ford Ind. Est Eastleigh Hampshire SO53 4NF
Tel: 08448 156060 Fax: 02380 261204 E-mail: [email protected] Web: www.ves.co.uk
Acoustic Supply Unit
Installation, Operation and Maintenance Manual
®
Maintainance
6
Continued
Fan assembly
removal/ installation
Fig.
23 24
To remove the fan assembly, ensure the unit is fully isolated. Separate the supply plugs to the
fan as shown in Fig.
21
. Back-out the bottom screws but do not remove
24
. Remove the top
fixings completely and retain
23
. Carefully lift the fan assembly over the retained fixings and
remove the fan assembly from the unit.
To replace the fan assembly, locate the mounting plate over the fixings retained in the unit
bulkhead. Secure the loose fixings through the mounting plate and tighten all the mounting
fixings. Reconnect the supply plugs as in Fig.
21
; if more than one plug is used, ensure the correct
plugs are reconnected as marked. E
nsure that the fans are free running by following the fan
alignment instructions in Fig.
22
,
adjust as required.
24
23
Fan assembly removal
Colourfan acoustic
units feature plug & socket connections to allow easy fan assembly removal
should it be required. Follow the instruction below.