Verve GLUTE BUILDER, Руководство пользователя

Страница: 19 / 20

15
PREVENTIVE MAINTENANCE
1. Daily Inspection
Clean and inspect machine frame; clean all the upholsteries.
Clean upholsteries and machine frame with neutral soapy water, remove dirt,
oil stain and perspiration on the surfaces and air dry them completely. Inspect the
frame for rupture, rustiness and other damage. Make sure that soldering points
and fastening parts are correctly fixed.
Fastening parts may get loose during normal use; therefore, please inspect
all the nuts, bolts, screws and other fastening parts, make sure they are well
tightened and correctly assembled. The machine can only be put into use when
no problem is found.
2. Weekly Inspection
Clean upholsteries; inspect, lubricate bearings and bushings.
(1) Clean upholsteries with special detergent. Note: It must be neutral detergent.
Never use detergent which contains solvent, ethanol, ammonia or petroleum.
(2) Inspect bearings and lubricate shaft bushing: it’s recommended that a small
amount of silicone oil should be used for lubricating shaft bushing which is used
for supporting shaft. Spray the oil onto shaft and twist the shaft several laps inside
shaft bushing; meanwhile, check whether the bushing is excessively abraded or
damaged.
Reminder: Do not use petroleum-based lubricant; it will lead to rapid
accumulations of dirt and hair on the machine and may damage bearings.
3. Monthly Inspection
(1) Inspect main frame and press arms; inspect all fastening parts.
(2) Inspect main frame and press arms: check if they are complete and work
normally; check if there’s cracking, peeling paint or rustiness. Repair or replace
the parts according to actual condition.
(3) Check if main frame is cracked. Pay special attention to solder joints. If any
crack, suspend the machine immediately and contact maintenance staff to repair it.
(4) Check if there’s rust or peeling paint on frame; if yes, wipe it gently with wet/
dry fine thread emery cloth, or steel wire (fine thread) ball and then repair paint
chips.