Verve 200321, Инструкция по сборке

Страница: 12 / 23

- 12 -
BIKE ASSEMBLY
STEP 1
1. Make sure the quill nut at the end of the stem is
loose.
If it is not loose, loosen it with the multi tool.
2. Make sure the brake cables aren’t twisted, and
that the front fork is facing the correct way – with
the brake mechanism at the front.
3. Before you insert the handlebar,
check that the
frame, the front wheel fork, and the handlebar, are all
correctly aligned as seen.
4. Insert the handlebar, and make sure that the height
is between the maximum and minimum markers as
shown. Once in position, tighten the quill nut.
ATTACHING THE HANDLEBAR
STEP 1
OR
WARNING! When assembling the handlebar and stem, make sure it is inserted
beyond the minimum insert mark. Failure to observe this warning may lead to a
potentially unstable bike and may result in serious personal injury.
1
3
4
4
2
1
3
2
4